Advance Turbo Flasher (ATF Box) and ATF-V3 - All-in-1 Ultimate Adapter

Advance Turbo Flasher (ATF Box) is a highly professional and time-saving solution for Nokia cell phone servicing.

ATF-V3 - All-in-1 Ultimate Adapter for ATF BIG BOX / Nitro / Lighting. This adapter supports JTAG / EMMC / ISP / MMC cards.

Advance Turbo Flasher (ATF Box) - Features:

• Flash
  • Supports new loaders for SL3 phones:
    • New RAPUYAMA loaders with new protocol (2010 loaders)
    • Dead USB flashing (for new loader models also)
  • Super fast Nokia flashing
    • Nokia E52 full flash via Fbus (49 sec)
    • Nokia X3 full flash (29 sec)
    • Nokia 6500c full flash via Fbus (28 sec)
    • Nokia 6700c (48 sec)/Nokia 6120c (52 sec) full flash
• Repair
  • SL1, SL2, SL3 Super dongle key repair
  • SL1, SL2 SIMlock data repair
• Unlock
  • SL1, SL2 SIM lock remove via codes
  • New Rapido SL3 SIMlock remove. The following versions are supported:
    • 5800d (RM-356) - v31.0.008 - v30.0.011 - v31.0.101
    • 6790s - 1c (RM-492)
    • 6790s - 1b(RM-599)
    • E63 (RM-437) - v400.21.013
    • E71 (RM-346) - v400.21.013
    • N96 (RM-247) - v30.033 - v30.101
  • Simlock RPL unlock/relock

Advance Turbo Flasher (ATF Box) - Software Features:

• High speed turbo flash
• New protocol devices X3, X6, E52, E55, 6700 etc. and all Rapuyama Fbus flash
• Tuning and Maintenance
  • Life Timer Tuning (reset/write life time)
  • Factory Reset
  • Warranty Edit
  • Production Data Edit
  • Read/write camera configuration
• IMEI and locks
  • Safe unlock by means of code calculation (Supports SL1 SL2 and some SL3 models)
  • Unlock / Relock using RPL method
  • Super Dongle key repair
• PM (Permanent Memory)
  • Read/write permanent memory using SX4 Server
• Phone Test (self-test)

Advance Turbo Flasher (ATF Box) - Hardware Features:

• 480 mbps USB 2.0 Connection
• 100% FPGA based implementation of the Flash BUS protocols
• Adjustable VCCIO Logic Levels (3.30v, 2.80v and 1.80v)
  • Compatible with old phone model Logic Level (3.30v)
  • Compatible with new phone model Logic Level (2.80v)
  • Compatible with future phone model Logic Level (1.80v)
• Proper ESD protection on the FLASHBUS port
  • Protects phone damage due to Electro Static Discharge
• Ultra Fast Flash Clock currently up to 15 MHz
  • Firmware updatable to support up to 60 MHz without hardware modifications
• Internal VPP Flash Voltage Generator (3.0v, 5.0v, 9.0v and 12.0v)
  • Makes faster Flash Erasing on slow phones
  • Does not require external power adapters to generate 9.0v and 12.0v
  • Uses a Fast Switching SEPIC design
• Hardware upgradable through internal expansion slots
• MicroSD Card slot for future developments
• Dual RJ-4x Ports (RJ-45 and RJ-48) for external communication
  • The RJ45 port is the main "Turbo" Bus
  • The RJ48 port is the Secondary Bus that can support parallel or serial protocols such as 2Mbps UART, JTAG and Flashing Protocols
• 5 Multicolored LED Indicators:
  • Rectangular Orange: FBUS_RX
  • Rectangular Green: FBUS_TX
  • Circular Blue: USB_POWER / ACP-X_POWER
  • Circular Green: VBATT
  • Circular Orange: VPP

ATF-V3 - All-in-1 Ultimate Adapter For ATF BIG BOX / Nitro / Lighting. This adapter supports JTAG / EMMC / ISP / MMC cards.

ATF-V3 Unique Features:

• ON - Strong PULL-UP resistors will be applied to eMMC CMD (blue) and DATA (green) lines. This is very useful feature for phones that require VccQ and Vcc power connections (Samsung, HTC, etc.)
• OFF - PULL-UP resistors WILL NOT be used. This is normally done with Nokia Lumia phones which do not require VccQ and Vcc connections for a more stable link, set switch to "ON" and make sure to connect required power to VccQ and Vcc lines
• 3.3v - Most of new and old Micro SD cards are compatible with 3.3v Vcc
• 1.8v - With this option future low-powered Micro SD cards would be supported as well

For eMMC Use Only:

• NC - Secondary CLOCK will not be used for eMMC communication*
• CLK2 - Secondary CLOCK will be used for eMMC Communication

*When adapter is used for a NON-EMMC connection such as JTAG or Micro SD card, make sure that DIP switch is set on the "NC" position.
"CLK2" is NOT REQUIRED for most eMMC chips, but setting DIP switch to "CLK2" will give you a stronger CLK (red) signal for better eMMC communication.

Advance Turbo Flasher and ATF-V3 - All-in-1 Ultimate Adapter - Package Content: *

• Advance Turbo Flasher Box (ATF Box) – 1 pc.
• ATF Version 3 All-in-1 Adapter for ATF Box – 1pc.
• FPC Ribbon Cable – 2pcs.
• Lumia 510 / 610 Connector – 1pc.
• Molex Port for Lumia 610/510 – 1pc.
• BGA PCB 153/169 – 1pc.
• BGA PCB 182/186 – 1pc.
• Testpoint Finder Probe Wire – 1pc.
• Copper Wire 0.1 mm – 1pc.
• Cellphone Opening Kit – 1 set.

* Due to the onrush of technology and efforts to meet market demands, we retain the right to change the list of included cables and accessories. More details are available from our sales managers.